loading
reading
writing
saving
searching
Lester's Electric Puller, Manual Davit, Buoy, Crab Pot-Slip Ring
QR Code Link to This Post
Welcome to Lester's Marine Gear! We're a family-owned and operated business that takes pride in offering high-quality Crab Pots, Shrimp Pots, Crawfish Pots, Manual/Electric Pot Pullers, Davits, Motors & other Accesories made right here in the USA.
Our website sales are available 24/7.If you prefer to see our products in person, our showroom is open Tuesday to Friday from 10 am - 4 pm PST.
If these hours don't work for you, we're happy to schedule an appointment after hours.
Our phone support is available from 8 am - 9 pm PST 7 days a week.
We are currently shipping our products to these states : Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Washington DC, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming.
For Product Pictures & Prices
Contact Us :
☎︎ Call 503.983.6493
🌎︎ Visit www.lesterscrabpots.com or www.lestersmarinegear.com
🔥 Lester's Sch-80 ST 12V Electric Pot/Trap Puller 🔥
➤ Lester's 3-piece ST 12V Electric Pot Puller features a heavy-duty 1.5” Schedule 80 aluminum davit and a water-resistant 12V DC motor available in 2.0 HP or 2.5 HP. The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly and a 12-volt 50 amp Off/On electrical switch.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our 12V electric pot pullers come with a folbe open pulley block with a ¼” stainless-steel quick link, two ¼” stainless pins to attach the motor package to the davit and one 5/16” stainless pin to secure the davit to the mounting bracket. Delrin-sleeved gunnel and flat floor mount set are also included.
➤ Lester’s ST 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s ST 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 200 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ All unit stands 76” tall with a horizontal reach of 33”.
➤ This unit comes with a 1-year warranty.
Price: $1,530.00 (2.0 HP Motor Variant), (2.5 HP Motor Variant - Out of Stock)
🔥 Lester's ST 12V Electric Pot/Trap Puller Motor Package 🔥
➤ Lester's ST 12V Electric Pot Puller Motor Package is compatible with most Schedule 80 electric pot pullers on the market. It features a heavy-duty 12V DC water-resistant motor available in 2.0 HP or 2.5 HP. The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly and a 12-volt 50 amp Off/On electrical switch.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our motor package comes with two 1/4" stainless pins to attach the motor package to the davit.
➤ Lester’s ST 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s ST 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 200 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ This unit comes with a 1-year warranty.
Price: $1,205.00 (2.0 HP Motor Variant), (2.5 HP Motor Variant - Out of Stock)
🔥Lester's Sch80 RA 12V Electric Pot/Trap Puller 🔥
➤ Lester's 3-piece RA 12V Electric Pot Puller package features a heavy-duty 1.5” Schedule 80 aluminum davit and a water-resistant 12V DC motor available in 2.0 HP or 2.5 HP. A Rope Assist device is installed to eliminate rope slippage.➤ The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.
➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly and a 12-volt 50 amp Off/On electrical switch.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our electric pullers come with a folbe open pulley block with a ¼” stainless-steel quick link, two ¼” stainless pins to attach the motor package to the davit and one 5/16” stainless pin to secure the davit to the mounting bracket. Delrin-sleeved gunnel and flat floor mount set are also included.
➤ Lester’s RA 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s RA 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 200 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ All unit stands 76” tall with a horizontal reach of 33”.
➤ This unit comes with a 1-year warranty.
Price: $1,620.00 (2.0 HP Motor Variant), $1,790.00 (2.5 HP Motor Variant)
🔥Lester's Sch80 RA-Black 12V Electric Pot/Trap Puller 🔥
➤ Lester's 3-piece Sch-80 RA-Black 12V Electric Pot Puller package features a heavy-duty 1.5” Schedule 80 aluminum davit, Black Powder Coated for superior protection against moisture, saltwater, corrosion, wear, and impacts. The sleek black finish adds a professional, modern look.➤ It includes a water-resistant 12V 2.5 HP DC motor. A Rope Assist device is installed to eliminate rope slippage. It also comes with a 12-volt 50-amp Power Off/On electrical switch for hands-free operation, allowing the motor to rotate counterclockwise.
➤ The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance. The motor package includes a two-piece stainless knurled sheave, aluminum hub, and a Delrin rope guide v-roller assembly.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our electric pullers come with a folbe open pulley block with a ¼” stainless-steel quick link, two ¼” stainless pins to attach the motor package to the davit and one 5/16” stainless pin to secure the davit to the mounting bracket. Delrin-sleeved gunnel and flat floor mount set are also included.
➤ Lester’s 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 200 lbs.
➤ Both accept line sizes from 5/16” to 1/2”. Sheave spacers are available for wider rope.
➤ All unit stands 76” tall with a horizontal reach of 33”.
➤ This unit comes with a 1-year warranty.
Price: $1,940.00 (2.5 HP Motor Variant)
🔥 Lester's RA 12V Electric Pot/Trap Puller Motor Package 🔥
➤ Lester's RA 12V Electric Pot Puller Motor Package is compatible with most Schedule 80 electric pot pullers on the market. It features a heavy-duty 12V DC water-resistant motor available in 2.0 HP or 2.5 HP. A Rope Assist device is installed to eliminate rope slippage.➤ The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.
➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly and a 12-volt 50 amp Off/On electrical switch.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our motor package comes with two 1/4" stainless pins to attach the motor package to the davit.
➤ Lester’s RA 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s RA 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 200 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ This unit comes with a 1-year warranty.
Price: $1,295.00 (2.0 HP Motor Variant), $1,465.00 (2.5 HP Motor Variant)
🔥Lester’s Sch80 SE 12V Electric Pot/Trap Puller 🔥
➤ Lester's 3-piece SE 12V Electric Pot Puller features a heavy-duty 1.5” Schedule 80 aluminum davit and a water-resistant 12V DC motor available in 2.0 HP or 2.5 HP. A Rope Assist device is installed to eliminate rope slippage. It also comes with a 12-volt 50 amp Momentary Up & Down electrical switch for hands-free operation, allowing the motor to rotate either clockwise or counterclockwise.➤ The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.
➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our electric pullers come with a folbe open pulley block with a ¼” stainless-steel quick link, two ¼” stainless pins to attach the motor package to the davit and one 5/16” stainless pin to secure the davit to the mounting bracket. Delrin-sleeved gunnel and flat floor mount set are also included.
➤ Lester’s SE 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s SE 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 200 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ All unit stands 76” tall with a horizontal reach of 33”.
➤ This unit comes with a 1-year warranty.
Price: $1,765.00 (2.0 HP Motor Variant), $1,940.00 (2.5 HP Motor Variant)
🔥Lester's Sch80 SE-Black 12V Electric Pot/Trap Puller 🔥
➤ Lester's 3-piece Sch-80 RA-Black 12V Electric Pot Puller package features a heavy-duty 1.5” Schedule 80 aluminum davit, Black Powder Coated for superior protection against moisture, saltwater, corrosion, wear, and impacts. The sleek black finish adds a professional, modern look.➤ It includes a water-resistant 12V 2.5 HP DC motor. A Rope Assist device is installed to eliminate rope slippage. It also comes with a 12-volt 50 amp Momentary Up & Down electrical switch for hands-free operation, allowing the motor to rotate either clockwise or counterclockwise.
➤ The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance. The motor package includes a two-piece stainless knurled sheave, aluminum hub, and a Delrin rope guide v-roller assembly.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our electric pullers come with a folbe open pulley block with a ¼” stainless-steel quick link, two ¼” stainless pins to attach the motor package to the davit and one 5/16” stainless pin to secure the davit to the mounting bracket. Delrin-sleeved gunnel and flat floor mount set are also included.
➤ Lester’s 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 200 lbs.
➤ Both accept line sizes from 5/16” to 1/2”. Sheave spacers are available for wider rope.
➤ All unit stands 76” tall with a horizontal reach of 33”.
➤ This unit comes with a 1-year warranty.
Price: $2,090.00 (2.5 HP Motor Variant)
🔥 Lester's SE 12V Electric Pot/Trap Motor Package 🔥
➤ Lester's SE 12V Electric Pot Puller Motor Package is compatible with most Schedule 80 electric pot pullers on the market. It features a heavy-duty 12V DC water-resistant motor available in 2.0 HP or 2.5 HP. A Rope Assist device is installed to eliminate rope slippage. It also comes with a 12-volt 50 amp Momentary Up & Down electrical switch for hands-free operation, allowing the motor to rotate either clockwise or counterclockwise.➤ The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.
➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our motor package comes with two 1/4" stainless pins to attach the motor package to the davit.
➤ Lester’s SE 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s SE 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 200 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ This unit comes with a 1-year warranty.
Price: $1,445.00 (2.0 HP Motor Variant), $1,615.00 (2.5 HP Motor Variant)
🔥 Two Piece Schedule 40 Recreational Pot Puller Kit 🔥
➤ This recreational pot puller is the ideal choice for all non-motorized pot pulling applications.➤ The two-piece design provides for easy transport, storage and removal off your boat or skiff.
➤ When assembled the davit is approximately 76 inches tall with a 36 inch reach and breaks down to 48 inches long for easy storage.
➤ Complete Kits Include: Two-piece schedule 40 manual davit. Aluminum gunnel and combination base floor mounts. Two stainless steel wire lock hitch pin locks (1/4” & 5/16”). Folbe open face chain link pulley block with a ¼” clevis shackle for mounting pulley to the davit. 150 lbs. pulling capacity.
Price: $339.95
🔥 Schedule 80 Heavy Duty Pot Puller Kit 🔥
➤ The schedule 80 heavy duty two piece manual pot puller is the ideal heavier load rating choice for manually pulling pots. Three Piece option is convertable to motorized pot pulling in the future if necessary.➤ The two-piece design provides for easy transport, storage, and removal off your boat or skiff.
➤ When assembled the davit is approximately 76 inches tall with a 36 inch reach and breaks down to 48 inches long for easy storage.
➤ Complete Kits Include: Two-piece schedule 80 manual davit. Upgraded aluminum Derlin sleeved gunnel and combination base floor mounts. Two stainless steel wire lock hitch pin locks (1/4” & 5/16”). Folbe open face swivel pulley block with a ¼” clevis shackle for mounting pulley to the davit. 200 lbs. pulling capacity.
Price: $399.95(Two Piece), $439.00(Three Piece)
🔥 CRAB POTS, CRAB RING TRAPS, SHRIMP POTS, CRAWFISH POTS, CLAM GRABBERS 🔥
✮ Lester's America Crab Pot ✮
◼️ The Cadillac of crab traps. The highest quality, longest-lasting, best fishing Crab Pot on the market. Built to withstand harsh weather, high tides, and more; the America Pot is built for the fishermen who want the best. ◼️ 100% American Made. ◼️ Coated with Marine Grade Red Thermoplastic. ◼️ 29 inches diameter. ◼️ 1/2 inch steel construction. ◼️ Weighs 26 pounds. ◼️ Stainless weighted gates prevent doors from sticking open. ◼️ Stainless Steel Ramps improve crab footing. ◼️ Hand-pulled .041" stainless wire lacing. ◼️ Available in 2, and 3-door construction. ◼️ The price Does NOT include a bait box, buoys, or rope.Price: $239.00 (2 Doors), $309.00 (Rubber Wrapped Top & Bottom Ring - 2 Doors), $264.00 (3 Doors), $334.00 (Rubber Wrapped Top & Bottom Ring - 3 Doors)
✮ Lester's Independence Crab Pot ✮
◼️ The tried and true, black PVC-coated Crab Pot. The longest lasting PVC coated Crab Pot on the Market. Perfect for sports fishermen looking to fill their rigs with crabs on their outings. ◼️ 100% American Made. ◼️ Coated with Marine Grade Red Thermoplastic. ◼️ 29 inches diameter. ◼️ 1/2 inch steel construction. ◼️ Weighs 26 pounds. ◼️ Stainless weighted gates prevent doors from sticking open. ◼️ Stainless Steel Ramps improve crab footing. ◼️ Hand-pulled .041" stainless wire lacing. ◼️ Available in 2, and 3-door construction. ◼️ The price Does NOT include a bait box, buoys, or rope.Price: $239.00 (2 Doors), $264.00 (3 Doors)
✮ Lester's Liberty Crab Pot ✮
◼️ The highest quality, longest lasting, best fishing Crab Pot on the market. Built to withstand harsh weather, high tides, and more; the Liberty Pot is built for the fishermen who want the best. ◼️ 100% American Made. ◼️ Coated with Marine Grade Red Thermoplastic. ◼️ 26 inches diameter. ◼️ 3/8 inch steel construction. ◼️ Weighs 16 pounds. ◼️ Stainless weighted gates prevent doors from sticking open. ◼️ Stainless Steel Ramps improve crab footing. ◼️ Hand-pulled .041" stainless wire lacing. ◼️ Available in 2 doors. ◼️ The price Does NOT include a bait box, buoys, or rope.Price: $209.00 (2 Doors)
✮ Lester's Lincoln Kayak Crab Pot ✮
◼️ The highest quality, longest-lasting, best fishing Crab Pot on the market. Built to withstand harsh weather, high tides, and more; the Kayak Pot is built for the fishermen who want the best. ◼️ 100% American Made. ◼️ Coated with Marine Grade Red Thermoplastic. ◼️ 26 inches diameter. ◼️ 3/8 inch steel construction. ◼️ Weighs 12 pounds. ◼️ Stainless weighted gates prevent doors from sticking open. ◼️ Stainless Steel Ramps improve crab footing. ◼️ Hand-pulled .041" stainless wire lacing. ◼️ Available in 2 doors. ◼️ The price Does NOT include a bait box, buoys, or rope.Price: $199.00 (2 Doors)
✮ lester's Patriot Crab Cage Pot With Anti Escape Fingers ✮
◼️ Lester's most innovative crab pot! The Patriot Pot is designed to still allow crabs to enter the trap, even if the tide flips the trap upside down. A modular design allows for multiple Patriot Pots to stack and store easily in your boat. ◼️ 100% American Made. ◼️ 10.5-gauge Marine Grade Thermoplastic-coated wire mesh. ◼️ Anti-Escape Entry Fingers. ◼️ Stacks wells for maximizing boat deck usage. ◼️ Successfully catches crabs upside down. ◼️ The price Does NOT include a bait box, buoys, or rope.Price: $194.00 (28" x 20" x 12"), $204.00 (32" x 24" x 12")
✮ Lester's Standard Crab Slip Ring Trap ✮
◼️ The Standard Crab Slip Ring Trap is Lester's highest-quality slip ring trap. Designed to keep crabs in as you pull them from the water. ◼️ 100% American Made. ◼️ Coated with Marine Grade Red Thermoplastic. ◼️ 29" diameter. ◼️ 10" Tall. ◼️ Weighs 10 pounds. ◼️ 3/8 inch steel construction. ◼️ Comes with a three-point harness.Price: $179.00
✮ Lester's Heavy Duty Crab Slip Ring Trap ✮
◼️ The Heavy Duty Crab Slip Ring Trap is Lester's highest quality heavy-duty slip ring trap. Designed to keep crabs in as you pull them from the water and to stay in place in moderate to heavy currents.. ◼️ 100% American Made. ◼️ Coated with Marine Grade Red Thermoplastic. ◼️ 29" diameter. ◼️ 10" Tall. ◼️ Weighs 18 pounds. ◼️ 1/2 inch steel construction. ◼️ Comes with a three-point harness.Price: $189.00
✮ Lester's Crab Ring ✮
◼️ The Crab Ring is Lester's highest quality ring. Designed to keep crabs in as you pull them from the water, Lester's Crab Ring is perfect for your next fishing trip. ◼️ 100% American Made. ◼️ Hand Wrapped with EPDM roofing rubber. ◼️ Weighs 9 pounds. ◼️ The upper ring is 29" o.d. made out of 1/2" material and the lower ring is 22" o.d. and made out of 3/8" material. ◼️ The extended distance between the upper and lower ring is approximately 18 inches.Price: $139.00
✮ Lester's Commercial Crab Ring ✮
◼️ This Crab Ring is Lester's highest-quality commercial ring. Designed to keep crabs in as you pull them from the water, Lester's Crab Ring is perfect for your next fishing trip. ◼️ 100% American Made. ◼️ Hand Wrapped with EPDM roofing rubber. ◼️ Weighs 14.5 pounds. ◼️ 36" diameter 5/8" upper steel hoop. ◼️ 29" diameter 3/8" lower steel hoop. ◼️ Lower Hoop Laced with Heavy Duty .043 stainless steel crab pot knitting wire. ◼️ Comes with a 3-point harness. ◼️ Local pick-up is also available for this product. If you would like us to ship this item to you, please contact us prior to ordering for shipping rates.Price: $199.00 (Pre-Order Only)
✮ Lester's 33" Hoop Net ✮
◼️ Lester's Hoop Net Trap is specially designed for catching crabs & lobsters. It features tightly woven seine twine netting, enabling crabs and lobsters to easily climb the 35-degree sloped sides and be drawn into the 18" top opening ring through a combination of bait and gravity. ◼️ Construct with 3/8" outer diameter material, the 33" outer diameter lower ring and 18" outer diameter upper ring are linked by 4 sturdy 10" uprights made of steel supports. Heavy-duty harness ensures a secure connection to your rigging. The entire steel frame structure is powder-coated for enhanced durability. The hoop net stands at an overall height of 8" and weighs 8 lbs. This hoop net proves to be a highly efficient alternative to crab and lobster traps and its stackable design allows for a more compact storage footprint. ◼️ 100% American Made.◼️ Marine Grade Powder Coated.◼️ High-Quality Seine Twine Net.◼️ Heavy-duty hollow braid harness.◼️ 18" upper and 33" lower ring.◼️ Weighs 8 lbs.Price: $189.00 (Pre-Order Only)
✮ Lester's 36" Commercial Round Crab Pot ✮
◼️ Lester's 36" commercial crab pots come with two large entries and anti-escape triggers. ◼️ Our commercial pots are laced with .043 heavy-duty stainless steel crab knitting wire, The commercial pots are wrapped with commercial-grade EPDM rubber. ◼️ Our commercial pots weigh approximately 45 pounds and are handmade in the U.S.A. Zinc Bolts and Zinc are optional and the cost for the bolt is $6.00 and the 3-pound Zinc is $14.00. ◼️ Local pick-up is also available for this product. If you want us to ship this item, don't hesitate to contact us before ordering for shipping rates.Price: $314.00 (Pre-Order Only)
✮ Lester's Square Commercial Crab Pot ✮
◼️ Lester's Square Commercial Crab Pots are Special Order Only. ◼️ Lester's Square Commercial Crab Pots weigh approximately 42 pounds and are laced with 043 Stainless Steel Wire. ◼️ The pots are 29x 29x 12 inch in diameter, wrapped with EPDM rubber, and come with a welded zinc mounting bolt. ◼️ Local pick-up is also available for this product. If you want us to ship this item, don't hesitate to contact us before ordering for shipping rates.Price: $314.00 (Pre-Order Only)
✮ Lester's Crawfish Trap ✮
◼️ Our crawfish pot dimensions are 30 L x 11 W x 10 T and are constructed out of 14 gauge American Made Marine wire mesh. They come with a 1/2 Liter Orange Bait jar.Price: $69.00
✮ Lester's Shrimp Pots ✮
◼️ The Jefferson Shrimp Pots are constructed out of 14 gauge 1" x 1" PVC Coated Marine Grade Wire Mesh. All Shrimp Pots include a Baitwell for holding bait and an easy-access door for cleaning.Price: $164.00 (24" x 24" x 12"), $179.95 (30" x 30" x 12")
✮ Lester's Stainless Steel Clam Gun (Blue & Red) ✮
◼️ Lester’s Stainless Steel Clam Gun is constructed out of .031 stainless steel with a 5” O.D. barrel using a 2” schedule 40 aluminum stem and a 1 3/8” handle for reduced weight and added durability. ◼️ The handle is tig welded from high-quality aluminum, Cerakoted Blue, and is virtually indestructible. ◼️ An integrated vent system eases the removal of the clams from the sand while clamming. ◼️ Lester’s Stainless Steel Clam Gun is virtually indestructible and comes in 30”, 34”, and 38" overall lengths.Price: $209.00 (30"), $209.00 (34"), $219.95 (38"), $229.00 (42")
✮ Lester’s Aluminium Clam Gun ✮
◼️ Lester’s Aluminium Clam Gun is constructed out of .062 aluminum with a 5” O.D. barrel using a 2” schedule 40 aluminum stem and a 1 3/8” handle for reduced weight and added durability. ◼️ The handle is tig welded from high-quality aluminum, Cerakoted Blue, and is virtually indestructible. ◼️ An integrated vent system eases the removal of the clams from the sand while clamming. ◼️ Lester’s Aluminium Clam Gun is virtually indestructible and comes in 30”, 34”, and 37" overall lengths.Price: $174.95 (30"), $174.95 (34")
✮ Lester's Clam Bag ✮
◼️ Clam bag with adjustable waist strap. Mesh material allows water and sand through, wide reinforced opening allows for easy access. The bag measures 15" tall X 7" wide. Available in Red, Blue and Yellow.Price: $23.95
☎︎ Call 503.983.6493
🌎︎ Visit www.lestersmarinegear.com
🔥 Lesters's Ropes & Buoys 🔥
➤ 3/8" Leaded Rope - Available in 50ft ($18.39), 75ft ($27.39), 100ft ($36.39), 150ft ($54.39), 200 ft ($72.39), 250 ft ($90.39), 300 ft ($108.39).➤ 5/16" Leaded Rope - Available in 50ft ($15.34), 75ft ($22.84), 100ft ($30.34), 150ft ($45.34), 200 ft ($60.34), 250 ft ($75.34), 300 ft ($90.34).
➤ Both 3/8" & 5/16" Leaded Ropes are Available in 1800 ft. Rolls.
➤ Buoys 5 x 11 inch ($17.00)
Available in Yellow, Orange, Red/White, and White. Making it easy to find and identify where your traps are. If you also purchased a pot and rope from us and would like them rigged at no additional charge, please add free rigging to your shopping cart.
➤ Commercial Buoy 6 x 14 inch ($28.95)
Available in Yellow, Red/White, and White.
➤ 3/8" Rope Kits With One 5 x 11 inch Buoy
Available in 50ft ($33.50), 75ft ($42.50), 100ft ($51.50), 150ft ($69.50), 200 ft ($87.50), 250 ft ($105.50), 300 ft ($123.50).
➤ 3/8" Rope Kits With Two 5 x 11 inch Buoy
Available in 50ft ($49.00), 75ft ($58.00), 100ft ($67.00), 150ft ($85.00), 200 ft ($103.00), 250 ft ($121.00), 300 ft ($139.00).
➤ 5/16" Rope Kits With One 5 x 11 inch Buoy
Available in 50ft ($30.50), 75ft ($38.00), 100ft ($45.50), 150ft ($60.50), 200 ft ($75.50), 250 ft ($90.50), 300 ft ($105.50).
➤ 5/16" Rope Kits With Two 5 x 11 inch Buoy
Available in 50ft ($46.00), 75ft ($53.50), 100ft ($61.00), 150ft ($76.00), 200 ft ($91.00), 250 ft ($106.00), 300 ft ($121.00).
➤ California Buoys ($4.95)
These can be used for trailer buoys and are compliant for California 2021-2022 crabbing regulations for sporting crabbers. The Buoys are Red in Color and the measurement is 3 x 5 inch.
➤ Trailer Buoys ($12.95)
Extra Buoy to attach to your existing line for easy site and identification. Comes with a stainless snap hook, four feet of 5/16” hollow braid line and a gill net buoy.
➤ Buoy Flags ($4.95)
Our buoy flags are red in color, triangle-shaped, and measure 11” wide by 13” long.
➤ Lester's Two Piece Flag Buoy ($64.00)
Lester's Marine Gear Sports 48" PVC weighted Flag Pole includes one 6" x 14" red and white float which is highly visible. This is a two-piece flag pole that breaks down to approximately 33" for easy shipping and storage and is ready to use with any style crab or shrimp trap for easier sighting.
➤ Lester's Three Piece Flag Buoy ($69.00)
Lester's Marine Gear Sports 48" PVC weighted Flag Pole includes one 6" x 14" red and white float which is highly visible. This is a three-piece flag pole that breaks down to approximately 17" for easy shipping and storage and is ready to use with any style crab or shrimp trap for easier sighting.
☎︎ Call 503.983.6493
🌎︎ Visit www.lestersmarinegear.com
Tags: line hauler, crab pot puller, pot puller, pot hauler, scotty pot puller, shrimp pot puller, electric crab pot puller, crab davits, electric pot puller, trap pullers, ace line hauler, power hauler, scotty crab pot puller, crab puller, electric pot hauler, harbor freight crab pot puller, manual crab pot puller, electra dyne pot puller, crab pot hauler, crab trap puller, scotty puller, lobster pot hauler, 12v pot hauler, crab line puller, hydraulic line hauler, lobster pot puller, commercial crab pot puller, electric line hauler, electric lobster pot hauler, scotty crab puller, prawn trap puller, scotty trap puller, brutus pot puller, scotty line puller, buoy, leaded rope, boat buoy, water buoy, fishing buoy, crab pot floats, yellow buoy, red and green buoys, crab floats, lake buoy, crab pot buoy, orange buoy, crab trap buoy, foam buoy, lobster pot buoys, boat dock buoysmooring buoy, buoy weather, life buoy, water buoy, boat buoy, ocean buoy, sea buoy, noaa buoys, nun buoy, marker buoy, noaa weather buoys, buoy in the water, buoys waterfront, red buoy, fl buoys, crab trap buoy, buoys waterfront grill, egmont buoy, egmont key buoy, cape canaveral buoy