loading
reading
writing
saving
searching
1978 Chris-Craft Tournament Fisherman 254 with triple axle aluminum - $15,500 (Everett)
QR Code Link to This Post
The Tournament Fisherman typically came with 4 cyl Iron Duke engines but she has been replaced with twin freshwater cooled straight shaft 350Q’s with ~200 hours on them and velvet drives. It was repowered at North Harbor Marine in Anacortes. Cruises at 26Knots with ease at little throttle.
There are two 120 gallon aluminum fuel tanks, has lots of storage across the entire boat and has a several self-draining live wells cooler areas storage and more.
Monstro has self bailing decks, USCG approved fuel lines, heat exchangers boil cleaned, painted, and pressured tested, new sea strainers, new raw water impellers, new fuel filter water separators, new AGM batteries, new alternators. The carburetors were professionally rebuilt by Wrights Fuel systems.
Professionally refinished to 95% of the boat, putting in over 1300 hours, from below the water line to 8″ inside the gunwale and on top of the cuddy area in which they only used the highest quality marine grade everything with 6 coats color, 4 coats clear/topper, custom fit teak all around the gunwale area, custom made triple reinforced bowsprit, new forward hatch and horn.
Monstro is 95% complete, with the final items remaining so that the new owner can customize as desired:
Teak for all exterior brightwork boxes of spare new parts fittings and more
New custom made in USA marine boat seats with brackets(not fitted as owner is 6'5 and would most likely be way too far back and high for the average buyer)
Comes with a 250 mile use single dip in the water triple axle custom built 2023 Venture 12625 capacity trailer with:
Stainless fastener package
Stainless electric over hydraulic disc brakes
Two full size spares and mount
Target bunks
Guide bunks
PVC load guides
Dry weight is ~7800lbs
Ready to go and take out on the water today.
Incredibly stable and roomy platform.
Operating video below
https://youtu.be/JexjeiuxHns