Selling my 2018 50’s MIM Stratocaster Guitar w/ Nitro Finish and Tweed Case
One of the cleanest examples you i think you will see. Finish has some sparkle to it.
- All Factory original with factory specifications below.
One of my favorite things about this guitar is that the tuning is VERY stable and was well setup when I acquired from Skip @ A#.
All Case materials, Keys and Tremolo Arm are shown.
AND the ultra thin Nitro finish really does make a big difference in how this guitar sounds. It truly does breathe better than poly finished versions I have owned. But that is a very subjective comment, just my OP.
Includes original Tweed Hardshell Case
- Distortions that may appear in the main body pic re: pick guard are due to the original plastic pick guard protection that was never removed.
There is a Less than 1mm blemish in the back photo close up that is barely visible, 45 degrees from top left screw in this photos orientation.
No discernible fret wear anywhere on the neck, rarely played.
Body wood: Alder
Body finish: Nitrocellulose lacquer (vintage-style finish)
Body shape: Stratocaster
Color option: Candy Apple Red (also sunburst/blonde variants)
Neck material: One-piece maple
Neck shape: Soft “V”
Scale length: 25.5 in (648 mm)
Fingerboard radius: 7.25 in vintage radius
Frets: 21 vintage-style frets
Nut width: 1.650 in (42 mm)
Nut material: Synthetic bone
Neck finish: Gloss nitrocellulose lacquer
Truss rod adjustment: Vintage heel adjust
Electronics:
Pickup configuration: SSS
Pickups: 3 × Vintage-style Strat single-coils with staggered Alnico pole pieces
Switching: 5-way blade
Controls:
Master Volume
Tone (Neck)
Tone (Middle)
Hardware
Bridge: Vintage 6-screw synchronized tremolo with stamped saddles
Tuners: Vintage-style split-post tuners
Pickguard: 1-ply white
Hardware finish: Chrome
Knobs / switch tip: Aged white plastic
Cash Only - No Trades Considered
Serious Inquiries Only - No Solicitations - Happy to Answer Questions
Local Pick Up - Maple Valley, WA 98038.