craigslist | tools in tacoma / pierce

Craftsman Table Saw (Orting) $100

2008-10-15T14:54:43-07:00

On/off switch doesn't work. I just plugged into the motor on the back. stand up style with 3' table. comes with a fence. Haven't used it in 2 years. $100

RIDGID Pipe Threader with Stand model # 1215 (Graham / Eatonville) $1595

2008-10-15T14:46:40-07:00

RIDGID Pipe Threader with Stand
Model # 1215
115 v
13amp
40rpm
Good Condition

Clark Fork Lift (Lakewood / Tacoma) $1250

2008-10-15T14:45:28-07:00

Clark Order Picker Lift - OP-15 - 3000lb capacityI have 1 - 1992 Clark OP-15 Order Picker lift. I have only run this unit but a couple of times. I do not have a 24V battery charger. I did rent a charger at one point and everything seemed to test good. There is no warrantee on this unit. I see these units going for $3500 in similar condition on eBay but am asking $1250 or best offer.

253-983-1040 ask for Kert

Hyster , Raymond , Toyota , Lift

DELTA SAWBUCK FRAME AND TRIM SAW (ABLE LOANS-5414 PACIFIC AVE, TACOMA) $130

2008-10-15T14:37:13-07:00

A Delta Sawbuck frame and trim saw [model #33-150] for $130! All of items are guaranteed! This saw is used, but in great working order. We also have layaway available [25% down and 90 days to pay it off].

We are open M-F 9:30-6:00 and Saturday 10:00-5:00. Call 253-472-7296.

Paint gun SATA 1.3 Jet2000 HVLP NR2000 $200.00 (Gig Harbor) $200

2008-10-15T14:11:44-07:00

Auto paint gun(SATA 1.3 Jet2000 HVLP NR2000

SATA 1.3 Jet2000 HVLP NR2000 $200.00
Will consider reasonable offers. These are used and in excellent conditon.. Call or email.. call after 7pm 253-324-8043
The small gun has been sold..

gas pressure washer pump (parkland) $115

2008-10-15T14:01:54-07:00

for sale
1) 2,400 psi new never installed
vertically mounted cold water
7/8 shaft brass head
2,400/1.8 gm 3250 rpm
outlet m22x1.5
thermal relief valve
injector included
works on HONDA/ BRIGGS/ TECUMSEH 5.5 KEY SHAFT 3/16'' X1.5''
SELLING BECAUSE DIDN'T LINE UP WITH MY MACHINE/ ONLY
CALL GARY 253-538-5269 THANK YOU $115

Linde 200 Amp Mig Welder (Buckley) $995

2008-10-15T13:57:12-07:00

This unit has 25 feet lead extensions. Comes complete with gauges, wire and dolly. This is a commercial type welder with very low hours.
$995 or best offer.

Surplus Equipment - Birmingham Mill (Redmond) $3000

2008-10-15T13:31:42-07:00

Birmingham mill with variable speed. Good condition (power down does not work).

Contact: 425-890-9507

RotoHammer Bits- 1 3/8"-23 Rebar Eater Bit/ TE-YX (tacoma) $30

2008-10-15T13:22:47-07:00

I have 2 Hilti 1 3/8"-23 with an affective drill depth of 17 5/8". I used them on one job. $30 for 1 or $50 for both. Check the prices of these bits and then decide.

air tools (spanaway) $350

2008-10-15T13:13:33-07:00

reload 18 gauge 1/2 1 1/2 SLS18 air nail gun good condition also can come with Air Bostich pinner finishing nail gun very reliable and great condition

Lifetime Tool Collection (Olympia) $6000

2008-10-15T12:46:52-07:00

There are almost too many to list. High end Snap-on tools. $6,000.00 for everything or possible trade for older 6 cyl chev truck. I will split out the sets and boxes if you are interested. The cost of the items shown in the photos was $14,000.00 and I have all receipts. The tool boxes are multiple drawer stainless steel.

Please feel free to contact me at (360)628-5081. My name is Chris.

Dunlop Commercial Carpet Dolly - - - Only Used Once!!! (Puyallup) $75

2008-10-15T12:40:33-07:00

Dunlop brand Commercial carpet dolly. Originally purchased for $169, has only been used on one job.

Asking $75.

If you have any questions, please feel free to email them to me.

Keywords: carpet, dolly, industrial, flooring, red, metal, mover

Crain Undercut/Door Jamb Saw (Puyallup) $115

2008-10-15T12:36:09-07:00

Crain, model #555, undercut saw

Was purchased for $280

Asking $115. Cash only please.

Saw comes with case and manual.

If you have any questions please feel free to email them to me.

keywords: saw, electric, install, door, undercut, crain

tools and box (roy) $1000

2008-10-15T12:20:37-07:00

i have tools and box. asking 1000.00 but will take any offer over 800.00
it is like the one shown, but black.
253-215-0064

poland chainsw (fife) $65

2008-10-15T12:09:37-07:00

Poland wild thing chain saw 18" bar new chain couple years old asking $65 (253)221-2170

Temporary power poles (Tacoma) $60

2008-10-15T11:57:18-07:00

CHEAP!! $60.00 EACH or take both for $100. I have two underground temporary power poles that have been used in Pierce County and the City of Tacoma.

drain snake (tacoma) $400

2008-10-15T11:55:47-07:00

sewer snake comercial quality drain snake auto feed return if your looking you already know.have no more need make offer christin (253)304-3094

Miller ThunderBolt AC/DC $175 OBO (Gig Harbor) $175

2008-10-15T11:45:37-07:00

Miller Thunderbolt AC/DC ARC welder. AC 30-150/40-230 DC 20/150 amp.
Great welder,Good condition.Comes with cables and hood.

appliance dolly for refrig's washers, dryers etc. (gig harbor) $40

2008-10-15T11:35:50-07:00

very proffesional grade appliance dolley with stair helpers (drive belts stretched around a set of bearing'ed rollers) and an off center cam strap tightener too im guessing this thing cost about 300 new and i got it from a buddy so ill give it to you for forty. if you are interested email me back or ask for my address and come look at it. I can send pictures if you neeed. i assure you its extrememly rugged and well built and in great condition.

tools (spanaway) $500

2008-10-15T11:10:24-07:00

job boxes one large piano size and one very wide half size will sell together or seperate 253-535-1791

tools (spanaway) $60

2008-10-15T11:06:01-07:00

drywall screwdriver 120 volt 253-535-1791

Dewalt thickness planer #733 $200

2008-10-15T10:44:48-07:00

Dewalt thickness planer #733 12 1/2inch with xtra blades
Call Greg 253-312-4993

Brand New Generator Transfer Switch (Tacoma) $150

2008-10-15T10:28:28-07:00

Brand new, never used Connecticut Electric Model 10-7501A generator manual transfer switch. 7500 watts, 30 Amps, 10 circuits with built-in watt meters. Retails for $300.00. Phone (253) 381-1957.

shop smith v (Puyallup) $2000

2008-10-15T10:17:16-07:00

For sale one like new shop smith v with all accessories $2000.00.

Ask for George (253) 846-6428
bboy20001@live.com

Dremel MultiPro (lakewood/tacoma/fort lewis) $20

2008-10-15T09:53:10-07:00

Dremel MultiPro handheld rotary tool *works great*
has carrying case and 19 bits

email mommy_2_katelynn@yahoo.com
cash & pickup

CRAFTSMAN ROUTER (EDGEWOOD) $50

2008-10-15T09:16:07-07:00

1 1/2 HORSEPOWER ROUTER WITH TABLE - COMPLETE SET -

welder, (Tacoma) $6000

2008-10-15T08:39:19-07:00

Miller big 50 diesel welder mounted on new trailer, low hours (396), 120-240 volt A/C, can hook mig and tig,come by and test run it. have lots of rod.
253.474.9381

miller mig welder (Yelm) $800

2008-10-15T08:27:44-07:00

I've had it 2 years it has always done what I've needed it to. but it is just collecting dust. comes with an owner tank,face shield a large spool of wire,it's 220.don't really want to sell it so the price is firm. It's 130 amp good for smaller projects.millermatic 175
360-556-6444 or 360-556-6078

Antique Wood Windows (Tacoma)

2008-10-15T08:07:35-07:00

Various sizes and configurations. Will install mirrors in frames per request.
$20-40.

SNAP ON TOOL SET (Tacoma) $4500

2008-10-15T07:47:21-07:00

Full of tools ranging from:
�� drive through �� sockets, �� impact sockets, standard size and deep socket; �� through �� drive ratchets; 3/8�� impact sockets, 13mill through 19mill; wrenches ranging from 9/32 to 1 ��, angled and standard; ohmmeter, 1/2'' torch wrench, 250ftlb3/8�� impact gun and 3/8�� drive air ratchet; files, punches, chisels, slide hammers, pipe wrenches, micrometers, dial indicator, tap and dye sets, many size pliers and screwdrivers, gloves, welding supplies, brass drifts, 6 ��-15�� crescent wrench, crow�s feet and wobbly sockets allen head sockets, hex head sockets, and much more. This is a full mechanics tool set. I am no longer in the industry. Please email with any questions. Only asking $4,500

John Deere Hydraulic Controls (tacoma) $50

2008-10-15T07:46:52-07:00

John Deere dual hydraulic control valve. $50. email or call Karl 253 472 4867

Steel Saw Blades (Tacoma) $25

2008-10-15T07:40:51-07:00

8 12 inch steel saw blades - 4 new and 4 used. Used blades have been sharpened. Also one 10 inch blade and one 6 inch. $25 for the lot OBO. respond to post or call Karl 253 472 4867

Shop Dust Collector (University Place) $800

2008-10-15T07:00:53-07:00

.Large shop capacity dust collector with filters; 3 phase 10 horse motor.Respond to post or call Karl 253 472 4867

Berger Surveyors Level with Tripod (Gig Harbor) $75

2008-10-15T07:00:49-07:00

Berger Surveyors Level model 135 with CST tripod. Kirk 253-381-0601

Surveyor, level, berger, berger level, berger surveyors level, Econo Line Optical Level, opitca level, berger optical level, cst tripod

Delta Shaper (Tacoma) $850

2008-10-15T06:50:39-07:00

Older heavy duty floor model Delta Wood Shaper.Model No. 43-212 (single phase)

Respond to post or call Karl 253 472 4867

DEWALT D HANDLE ROTOHAMMER (tacoma) $100

2008-10-15T03:40:33-07:00

HARDLY USED R.HAMMER NO CASE COUPLE BITS 100 obo 253-330-0227

safety equip (Tacoma)

2008-10-15T03:27:51-07:00

Two 50' safety ropes (both with slide hookup) 6' bungee type lanyard with hooks at both ends 2 full harnesses all for 75.00 cell# 253 353-4091

drill press (Tacoma) $85

2008-10-15T00:55:16-07:00

this drill press can drill all kinds of angles,including compound. And the head can move back and forward or tilt the drill bit left or right. 5 speed. Table also tilts. most versatile drill you can find. used very little. I don't have room for it. ph # 253-210-7279

Propane Heaters/construction space heaters (Lake Tapps) $150

2008-10-15T00:21:08-07:00

Propane heaters that work great! Duel fuel.Call Amber @ 253-223-3393

CONSTRUCTION TEMP. POWER POLE (LAKE TAPPS) $100

2008-10-15T00:19:29-07:00

NEW CONSTRUCTION TEMPORARY POLE USED FOR MY NEW HOME THAT WAS JUST FINISHED. WORKS PERFECT AND IN GREAT SHAPE. CALL AMBER FOR DETAILS AT 253-223-3393

MATCO 240V Welder (Puyallup/Graham) $400

2008-10-14T23:10:30-07:00

For sale is a Matco 240 Volt Welder. Comes with gas regulator and almost new spool of wire. I payed $1500 for the welder and I'm moving so it has to go. Please call 2532128956 and ask for John or e-mail me if interested.

Ryobi table saw $60

2008-10-14T23:09:22-07:00

Diablo fine blade nice, 2nd model up.

porter cable router and table (Tacoma) $60

2008-10-14T23:02:59-07:00

porter cable router and table

Portable electric pressure washer 800 psi Karcher HD 555 (Tacoma) $30

2008-10-14T22:51:27-07:00

Portable electric pressure washer 800 psi Karcher HD 555. Work great! Call or text 253-414-7206

Skil 7 1/4" Skilsaw with Laser Guide Circular Saw (Puyallup) $65

2008-10-14T22:50:01-07:00

I bought this early this summer, don't need it anymore. Paid close to $100 for it new.

$65 cash only

Call or email Bill 206-909-3124

This Skil 7 1/4" Skilsaw with Laser Guide has a powerful 13 Amp, 2.5 HP motor, 4,600 RPM with built-in laser guides for accurate cutting. This Skilsaw had a Grip-Right� handle that offers optimal comfort and control. The Skilsaw has an anit-snag lower guard designed to reduce snags when making narrow cuts. This Skil Skilsaw has a spindle lock for easy blade changes by securing the spindle. This 7 1/4" Skilsaw has a rear view depth adjustment for easy assurance you have the correct cut depth.
Specifications: # Depth of Cut: @ 45� - 1 15/16"; @ 90� - 2 7/16" # Amperage: 13 # Max. Motor HP: 2.5 # Arbor Size: 5/8" Round # Cord Length: 6 Ft. # Blade Diameter: 7 1/4" # Certifications: CSA # Assembled in the USA
Standard Equipment: # 18 Tooth Carbide Blade # Blade Wench # Carrying Case

Dewalt DW106 5.4 amp Drill (Puyallup) $50

2008-10-14T22:43:37-07:00

DEWALT DW106 3/8-Inch Heavy Duty Variable-Speed Reversing 5.4 Amp Drill with Keyless Chuck. Barely used, and it shows. Includes case.
$50 and it's yours.

Call or email Bill 206-909-3124 Cash Only

From the Manufacturer The DW106 with its keyless chuck handles a wide variety of applications. Its 5.4-amp variable-speed reversing motor operates at 0-2500 rpm. Drills a wide assortment of holes in wood with a maximum capacity of 1-inch with a spade bit or 1-1/8-inch with a hole saw; up to 3/8-inch diameter holes in steel. The built-in, two-way level helps ensure straight and accurate holes both vertically and horizontally.

Weedeater - Homelite Trimlite 25cc gas powered (Puyallup) $40

2008-10-14T22:27:21-07:00

A gas powered homelite trimlite 25cc weedeater - $50

Works fine....leaks a little bit of oil at times though.

Call or email Bill 206-909-3124

Lawnmower - Craftsman 5hp rear bag (Puyallup) $25

2008-10-14T22:21:18-07:00

Craftsman rear bag 5hp push lawnmower - worked awhile back...I think it needs a tuneup, new spark plug, etc. It's older, but anyone handy with motors could get it for a steal. $25

Call or email Bill 206-909-3124

10 Gallon Wet/Dry Shop Vac Vacuum (Puyallup) $50

2008-10-14T22:13:21-07:00

10 Gallon Wet/Dry Shop Vac for sale. Good shape, has almost all attachments....one is missing, but the primary extension attachments are present.

$50

Wagner 4.8 gph do it yourself paint sprayer (Puyallup) $40

2008-10-14T22:08:29-07:00

I have a electric Wagner 4.8 gph do it yourself paint sprayer for sale. Used it one season and don't need it anymore. It's got some paint on it, but all works great....been sitting for a 6 months so may need to run it to clean out but it works great.

Paid $80, sell for $40

Call or email Bill 206-909-3124

Looks like the image shown, only black

10" Ryobi Table Saw / Router Table w/ Router / Tile Saw (NE Tacoma) $50

2008-10-14T22:01:11-07:00

Daddy needs a new set of skis and some dam room in the garage!!!
For Sale:
10" Ryobi BT3000 table saw with the following accessories
(Dado Blade set, Dado blade insert, miter clamping kit, sliding miter table & push shoe)
Price - $199.00

Home made router table with Router and the following accesssories
(Router fence, sliding miter guide and (7) router bits, (4) of which are brand new!)
Price - $89.00

8" Husky Wet Tile Saw model THD750C with lazer guide
Price - $59.00

Pressure Washer - Karcher 395 Electric Pressure Washer (Puyallup) $125

2008-10-14T21:52:31-07:00

I have a Karcher 395 Pressure washer that works great. Moving and downsizing so don't need it anymore.

Call or email Bill at 206-909-3124

ProSource Battery Powered Power Tools (Tacoma) $50

2008-10-14T21:37:03-07:00

Battery powered Power Tools
ProSource 19.2V tool set comes with Drill, Circular Saw, Jig Saw, Reciprocating Saw, Work Light, Two Batteries w/charger.

Melcher 12' 5000lb auto loader ramps (gig Harbor) $600

2008-10-14T21:01:08-07:00

two halves 18"w x 12'L 2500lb l ea. they can connect together for one 36"w ramp. both are in good condition. price new $1025.00

jet 1hp dust collector w/remote start (Gig Harbor) $100

2008-10-14T20:59:10-07:00

Jet bag type 110v 1hp dust collector for woodworking low hours runs great

mini metal lathe (Gig Harbor) $300

2008-10-14T20:58:07-07:00

mini metal lathe in very good shape around fifty years old mounted to nice table with coolant backsplash set up to run with coolant pump. runs nice, in pictures it is sprayed down with corrosion preventative.

10" Grizzly contractors table saw (Spanaway) $400

2008-10-14T20:22:51-07:00

1 1/2 hp Grizzly contractors 10"table saw 41" table, blades including dato set & molding set & roller stand for long board support.

Dave 253-209-3830

Ariens Lawnmower (puyallup) $25

2008-10-14T20:08:48-07:00

Ariens lawnmower, needs a shroud.
(the shroud covers the engine and holds the pull cord and recoil for starting the engine.)
part costs about 45 bucks.
fix 'er up, and you could be mowing lawns in no time!

Tecumseh 5hp Solid deck
Not Self propelled
bag is mold-free, rot-free
spark is good
carb is good
air filter in ok condition
wheels are spin freely
ask me questions!
Ad stays until sold.

253-720-Six one seven five

wood from a bowling alley (tacoma) $200

2008-10-14T20:06:04-07:00

I have wood that was taken out of a bowling alley. It is cut into slabs that are 8ft long 42in wide and 2 in thick. some are maple and some are douglas fir. They are $200 each and if you get 5 or more we offer a discount. Delivery is available for a charge.
For more information call
Ed 253 226 5460 or Jake 253 314 4718

Radial Arm Saw (Puyallup) $100

2008-10-14T19:53:31-07:00

Craftsman Radial Arm Saw
Solid motor.
about 10 to 15 years old
base included
call me 253- 720- six-one-seven-five

Honda Generator ES6500 (Sumner) $2250

2008-10-14T19:48:09-07:00

Honda ES6500 Deluxe Generator, Electric start, temp & oil alert, liquid cooled, auto idle, full frame w/ 2 wheels and handle bars, 110-220 volt (6)outlets. Less than 40 hours. Just had tuned-up at Jennings Equip. $2250.00 FIRM.

water pump pressure washer generator air compressor

2008-10-14T19:43:25-07:00

water pump 5.5 hp gas engine pumps 260 gals asking 600 o.b.o
3500 psi pressure washer 6.5 hp gas engine asking 650 o.b.o.
3500 watt 6.5 hp gas generator asking 650 o.b.o.
gas powered air compressor 5.5 hp 18.9 cfm 12 gal tanks asking 800 o.b.o.
all new

generators diesel

2008-10-14T19:42:14-07:00

7500 watt and 5500 watt generators both demos have less then 20 mins of run time on them asking 4000 o.b.o. for 7500 w and 2500 for 5500 w

Milwaukee Diamond Coring Rig Model# 4120-22 (Eatonville) $1200

2008-10-14T18:55:02-07:00

For sale is an almost new concrete coring machine. I purchased this machine new and used it for one project. It is in excellent condition and too nice to be stored and not used.
I also have three concrete coring bits for sale separately. Two have minimal use and the third has not been used.
This machine is currently available through many websites if you would like more information. (Northern tool, tool barn, my tool store) It sells for around $1950.00 to $2150.00 new not including coring bits.

(key words: drill concrete cutter saw hole)

Milwaukee Contractor-Plus Series Diamond Coring Rig

--------------------------------------------------------------------------------
LARGE BASE STAND WITH VAC-U-PUMP ASSEMBLY, METER BOX AND DIAMOND CORING MOTOR

--------------------------------------------------------------------------------

STANDARD EQUIPMENT FOR MILWAUKEE MODEL NO. 4120-22:
Diamond Coring Rig With Large Base Stand (4120), Vac-U-Pump Assembly (49-50-0200), Meter box (48-51-0120) And Model No. 4096 Diamond Coring Motor.

Milwaukee Contractor And Contractor-Plus Series Features:
MILWAUKEE LIGHTWEIGHT, PORTABLE CORING STAND FOR THE CONTRACTOR WITH HEAVYWEIGHT APPLICATIONS
Choose Just The Basic Or A Complete Stand From This New Contractor Series Of Diamond Coring Stands
Milwaukee Cast Aluminum Base With 4 Leveling Screws For Fast Accurate Leveling Adjustment
Durable Milwaukee Precision-Ground 2-1/2" Steel Column, 43-1/2" High
Rear Mounted Rack And Pinion Feed
Jackscrew For Ceiling And Backwall Bracing
Reversible Feed Handle
Locking Carriage
Heavy-Duty, Solid Rubber 5" Wheels
Universal Motor Adapter Plate

McCullough Chainsaw (Eatonville) $20

2008-10-14T18:54:28-07:00

Small saw $20.00 please call 253-691-4937 for information.

**NOTE** The larger saw in the picture has already been sold

16" Chainsaw - McCulloch (Gig Harbor) $85

2008-10-14T18:19:07-07:00

Runs great. Chainsaw has had little use. Includes carrying case, manual, extra chain, gas can, chain lube.

Cummins Onon 4000 GenSet Emerald Plus Generator (Bonney Lake) $1000

2008-10-14T18:07:57-07:00

Up for sell Cummins Onon 4000 GenSet Emerald Plus Generator. Has very little time on it. Does have some scratches and the oil filter has some dents (Shown in photo) but is still in good shape. Generator sells for 2,995.00 new. This is a generator designed to run a fully functioning R.V. This is no little temporary power generator this is a bad boy with 4000 watts of peak power.

Can be reached at (253) 350-5677, Please no calls after 9:30

Hand Tools for Sell or Trade (Tacoma)

2008-10-14T18:07:08-07:00

Hand tools for sell or trade for best 8-10 HP Outboard Motor
Channel lock Pliers #460
Proto Adjustable Wrench 15 in.
Proto Adjustable Wrench 12 in.
Proto Combo. Wrench 1 1/4 in.
Proto Combo. Wrench 15/16 in.
Craftsman Combo Wrench Set 5/8 thru 1 1/8 in
Craftsman 1/2 in. Drive Breaker Bar 22 in.
Universal Tool 1/2 in. drive air wrench
Air Grinder 1/4 in. Angle

Following items are NEW, never used: purchased in 1999.
Dial Caliper - Mitutoyo
Starrett
Mag Base Holder
Dial Indicator
8" Shaft Level

If interested please contact Bob Hughes at 253-759-4835

Cornwell Tool Box Large and yellow (Spannaway) $4000

2008-10-14T18:02:30-07:00

Large yellow Cornwell Tool box with silver trim and side cabinet Large box is estimated 78" by 30" with 18 drawers. Side Cabinet is locker size with 11 drawers. 6 indepedently suspension wheels for easy mobility. For more info call John at 253-948-7051. Side cabinet is $1200 or both is $5000.

5 TOOLS, ONE POWER SUPPLY,,AC POWER (TACOMA) $75

2008-10-14T17:55:20-07:00

DRILL,DRILLPRESS, SABER SAW, HEDGE CLIPPER, DISK SANDER,WORKS GREAT
PHONE 253 474 1268

large craftsman box ball barings (puyallup) $350

2008-10-14T17:30:01-07:00

I have for sale is a large craftsman box. it sells new for around 1k new. im asking 350 for mile because it fell out of the back of a truck. and needs some work. 350obo cash come take it away

air compressor vertical 60 gallon (Puyallup) $600

2008-10-14T17:08:03-07:00

60 gallon 6 horse twin cylinder oil free air compressor 240v 125 max new crank rods and pistons tank was drained often no rust hear it run have tools to test with also thanks for looking $600.00 OBO

Bandsaw, 12 in Craftsman (Tacoma) $75

2008-10-14T16:46:11-07:00

1980's vintage Craftsman 12 inch bandsaw with motor and stand. 360-531-0060

Dewalt Cordless Drill - 9.6v (Lakewood) $30

2008-10-14T16:32:02-07:00

Drill, battery, charger and Case. Drill works well but the battery has seen better days. It still works and holds a charge but doesn't last as long as it once did.

Star 8 Inch Wood Jointer (Tacoma) $350

2008-10-14T16:00:52-07:00

This Star 8 Inch Wood Joiner has only a matter of minutes of use. I did not have a photo so please take a look at a similar model that will show a similar view of what my machine looks like. Includes wheel cart for easy rolling in the shop. Email me for more info.

Rockwell Shaper 1 Phase with Carbide (Tacoma ) $325

2008-10-14T15:54:04-07:00

This is a model 43-122 Rockwell Shaper. Is in great shape with little use. Includes several or more carbide cutters. Photo is not of actual unit but shows a very good simular unit just to give you an idea of the type of machine. No wheels on this machine. Email for info

B&S 5 HP side shaft motor (Bonneylake) $50

2008-10-14T15:47:16-07:00

Good 5 hp newer style came off pressure washer, I/C model 3/4 shaft

300 foot measuring tape (Tacoma Waterfront) $30

2008-10-14T15:47:12-07:00

Like new set! Just pull out and crank it in! If you dont want to come pick up at FOSS HARBOR MARINA in Tacoma then just add $5 and I will ship via Priority Mail. Bill at 206-898-6955

welding cart (Bonneylake/Sumner) $75

2008-10-14T15:43:27-07:00

Heavy duty,industrial size,tires hold air,tires are wheelbarrow style,has box for tips,brushes wrenches has pick eye to lift if you need to leave tanks on a job, offer,this is a commercial built tool holds large bottles,if my price is to steep make an offer or get a recycled one from and support the chinese

VINTAGE 250 mcculloch chainsaw (Tacoma) $150

2008-10-14T15:40:50-07:00

Use as chainsaw or go cart motor good compression call jolen 253 314 9654

Aluminum Extension Ladders (Tacoma) $65

2008-10-14T15:25:33-07:00

I have forsale 3 10 feet aluminum ladders in good working conditions, for $65 each or $180 cash for all three. I don't know the brands, can't see it anywhere on the ladders. Ladders are 10ft and extends to 16ft or more, I don't remember. There are some paint splatters on them. I'm firm on my prices, serious cash buyers only please. If interested please call (253)228-5335, thanks.

EDGE HOG Black N Decker (Puyallup WA) $50

2008-10-14T15:12:29-07:00

Black and Decker edge-hog.

**Local buyers only
**No shipping
**No cashiers checks
**No trades

Air compressor (Tacoma) $25

2008-10-14T15:00:07-07:00

Works fine can plug it in and show you just needs male plug call jolen 253 314 9654

Miller Thunderbolt 225 AC Stick Welder (Graham) $175

2008-10-14T14:57:46-07:00

For sale is a Miller Thunderbolt 225 AC Stick Welder. Has leads with ground clamp and stinger. Works great! Check out the pictures below for more details. $175.00.

Need any more information or have questions, feel free to email.

10 speed Industrail Drill w/ stand (tacoma) $150

2008-10-14T14:10:48-07:00

Needs new switch but guarentied the be in good working order, includes heavy steel stand sell $150 ? 253 537 3408 Carl more photos on request.

SKILSAW model-77 WormDrive ( PICS) (tumwater) $50

2008-10-14T14:04:43-07:00

Skilsaw model-77 all metal no plastic--

heavey duty ball bearing--Used --in --

perfect shape-- They don't make them like this

anymore ! ! ! http://i339.photobucket.com/albums/n460/dwaine624/DSCF0039.jpg

OTC Genisys Matco Mac Snap on Scanners Software (Burien/Puyallup)

2008-10-14T14:00:01-07:00

I have several Genisys sets loaded with 3.0 for sale starting at $950 for Matco Determinator (pictured top right) loaded with 06 Domestic/Asian and going up to $2200 for Matco Determinator (pictured top left) 06 domestic/Asian, 05 Euro, 04 ABS Smart Cable and all domestic/asian/euro/abs cables. $1700 for OTC Genisys (pictured) 06 domestic/asian 04 ABS Smart Cable and all domestic/asian/abs cables More pics available. All machines in like new condition. Software packages including brand new 3.0 starter sets for $210. 06 domestic for $190. 06 Asian for $150. 07 domestic for $255. 07 Asian for $245. 05 Euro for $260, 05 Euro with cables for $450. system 2.0 for $80, and several otc cartidges I also have black Snap on MT2500 and MTG2500 reprogrammable cartridges VCI/TSI with 05 domestic/ 04 asian for $550. Email or call me at 2067132533 Snapon Cornwell Matco Mac OTC Automotive Diagnostic Scannner Scope Scan Tools

Contractor Air Compressor w/302 bolted on to trailer (Sumner) $300

2008-10-14T13:23:18-07:00

Contractor Air Compressor w/302 engine bolted on to a trailer so you can take this from job to job. $300 as is

253-863-7063

Compressor (Pacific, WA) $450

2008-10-14T13:04:07-07:00

For Sale: Ingersall Rand Century II Compressor, Model 234-3N, Ser # 30T 397368, Reliance 3 HP, Single phase motor. $450.00

Please visit our Web site: sales@worktrucksales.com

14.4volt DeWALT Drill (only) (tacoma) $35

2008-10-14T12:54:38-07:00

14.4volt DeWALT Drill. This tool is being sold seperately, without battery or charger $35. Works Great. Must sell fast. tacoma mall area cell#253-221-7478

Gas Weed Eater, Lightweight & Easy to Handle (Tacoma) $40

2008-10-14T12:53:38-07:00

Gas powerewd Weed Eater. It's Light, Easy to handle,and Starts Easy. Runs Great. Tacoma near Interstate 5. $40 cell# 253 221 75478

Trane commercial heat pump (Puyallup) $400

2008-10-14T12:52:40-07:00

Trane commercial heat pump 3 phase, never installed.COMMERCIAL, INDUSTRIAL--- Won't work in residential areas w/o 3 phase hook up. This heat pump was supposed to be installed in a 7-11 but wasn't. I bought it about 3 years ago and never used it. Perfect condition, been stored in storage unit since I bought it. It's a 4 ton, 3phase unit Model #TTR048C100A0 and the manufactured date is 5/92, both intake and output pipes are pinched off still. It's never been installed. (253)845-3769

15hp. Kellogg-American Air Compressor-PRICE REDUCED (Puyallup) $350

2008-10-14T12:49:15-07:00

3 phase 100gal. commercial air compressor, 15hp motor is less then 2 years old. Compressor motor stats: 452TV
Number of Cycles 4
Bore LP/HP 4.75 & 2.5
Stroke 3
HP Range 7.5 - 10
Speed RPM - 1750 Motor 590 / 846
PSI 60 to 200
Normal Free CFM 27 / 40

(253)845-3769

ShopVac, Craftsman 8 gal., 3.25 HP (tacoma) $40

2008-10-14T12:48:36-07:00

Craftsman Shop Vacuum. Complete, nice condition. It's the 8 gallon Canister Style, 3.25 HP, on 4 castors. It's fairly Compact with lots of Power. It was not used for wet work. It's Complete with the attachments. Must sell. $40. tacoma mall & Interstate 5 area. cell # 253 221 7478

Rolling Red Tool Cart Good for your Garage (Puyallup) $20

2008-10-14T11:37:09-07:00

Here is a red rolling tool cart that would be great for your garage. $20 Contact Mark @ 253-227-3302

Rockwell Band Saw Oldie but Goodie (Puyallup) $40

2008-10-14T11:35:31-07:00

Older Rockwell band saw works good. $40 Contact Mark @ 253-227-3302

Table Saw & Compound Saw $95

2008-10-14T11:35:22-07:00

I have a small table saw for 20 bucks. Works great for working trim and molding. I also have a Hitachi Compound Saw for 75 bucks. See pics. Last, I have a full set of Light Truck tires going for 50 bucks. I just post an ad in Auto Parts, but you can see them here...ad number 879017647. I available all day this week. Give me a call if you want anything you see...Jessie 253.303.2863

2500 Watt Generator 6.5 hp Winter is coming be prepared NEW (Tacoma) $225

2008-10-14T11:33:41-07:00

We just made a great buy on these generators, 2500 max watt, 2300 watt operating with a 6.5hp motor (Chinese made but older Honda design) with Key start & wheel kit. Features low oil cutoff, runs on Regular Gasoline,
New in the Box, boxes are branded "Robot"
Harbor Freight sells 2400 watt customer returns online for $279, and they don't have the wheel kit or the key start.
7241 South Tacoma Way, Tacoma 98409
253-572-0990

Teel Pump With 12V Motor / New / $75 (Tacoma)

2008-10-14T11:27:25-07:00

Call Jerry at 253-473-3786

RYOBI TABLE SAWS - YOU CAN DO IT ALL! (TACOMA) $250

2008-10-14T11:15:11-07:00

30 DAY WARRANTY!!!
LAWAWAY AVAILABLE!!!

You just cant beat this deal! These ryobi BTS20R models will provide you with onsite manueverability allowing you to go anywhere and cut anything, ANYTHING... But only one of them comes with wheels, and that means you need to get here quick for the best deal!!! And its 10% OFF TOO!!!!!

These are 10" saws, with 15 amp motors, cut depth of 3.625 inches, a standard throat plate and standard 3/8" x 3/4" miter gauge slots, and 27" rip capacity. These are great for the jobsite, because of their portability, and great for the amateur or hobbyist woodworker because of their robust features and performance, and also because of the wide array of available accessories!

AMERICAN PAWNBROKERS CALL OR STOP BY!!!
1415 72nd Street East Suite E. Tacoma, WA 98404
253-472-8920
Business Hours
Monday - Friday 9:30 am - 6:00 pm
Saturday 9:30 am - 5:00 pm
Sunday closed